Skip to Content

Defect detection (Subscribe)


Andec Manufacturing Ltd.


Manufacturer of NDT equipment, primarily ultrasonic and eddy current systems, to detect defects in strip, plate, rod, bar, wire, tube and billet to 2250°F at high speeds. Ultrasonic equipment to detect foreign particles in molten metal and measure the thickness and quality of refractory brick in the operating furnace from the outside. Ultrasonic immersion tanks for defect detection and metal cleanliness.

Review It Rate It Bookmark It

Binks Industries, Inc.

Binks Industries, Inc. manufactures Pinhole Detectors that will reliably detect a .001" hole in any opaque material. Strip widths can be as small as 4", and as large as 84". Binks offers Single Channel Detectors, Mult-Channel Detectors (2-10 Channels), Large Hole/Small Hole Detectors, and Weld Detectors. Our Detectors are used by manufacturers of Tinplate, Aluminum, Steel, Titanium Film, Polyfibron, and Plastics.

Review It Rate It Bookmark It

Cognex Surface Inspection Systems


Automated on-line surface inspection equipment.

Review It Rate It Bookmark It

Controle Mesure Systemes Inc

CMS Inc. designs and manufactures Eddy Current and Ultrasonic Nondestructive Testing equipment. We offer tailor-made and turnkey solutions to inspect welded or seamless tubes & pipes, wires, bars, or custom parts. Our systems can perform surface and full body defect detection, highly accurate dimensional measurement, material sorting and process analysis (sigma phase, heat treatment, ...).

Review It Rate It Bookmark It

Danieli Automation, USA


Supplier of automation and process control systems for metals industry HW integrator, SW development, installation/start-up service.

Review It Rate It Bookmark It

E.D.S. Electronic Design System s.r.l.

Complete Opto-electric design systems providing production defect detection solutions. Fifty sucessful installations in the last ten years including Pinhole Detectors for both Strip and Can forms, Weld Hole Detectors. The Company prides itself in providing novel solutions to your individual requirements.

Review It Rate It Bookmark It

Harris Instrument Corp.

Harris Instrument's Scan-A-Line products offer a complete line of Scanned LED Devices for small hole detection and weld marker identification. Scan-A-Line products are also used for web guiding and continuous strip width measurements.

Review It Rate It Bookmark It

Hyundai Heavy Industries Co., Ltd.


MAN B&W diesel, Sulzer diesel, Ulstein, Artsila engine, engine components, industrial robot, logistic steel pipe manufacturing.

Review It Rate It Bookmark It


Pinhole Detector for detecting pin holes down to 9 microns. Custom systems available.

Review It Rate It Bookmark It

IMS Systems Inc.

IMS Systems, Inc. is a leading manufacturer of isotope, X-ray and optical measuring systems which gauge the length, width, thickness, flatness, coating weight, cross-profile and speed of hot and cold ferrous and non-ferrous strip and plate. The company is headquartered in Heiligenhaus, Germany, near Dusseldorf. Its North American operations are based in Mars, PA, near Pittsburgh.

Review It Rate It Bookmark It

Innerspec Technolgies, Inc.

Innerspec® Technologies, Inc. is dedicated to the design and implementation of EMAT (Electro Magnetic Acoustic Transducer) technology. With over ten years of experience in fielding state-of-the-art EMAT production weld inspection equipment, Innerspec® Technologies remains the world's most proven supplier of EMAT products. Using our patented EMAT technology, our temate® products boast several million hours of "couplant-free" ultrasonic inspection in automated, continuous lines, in some of the harshest industrial environments.

Review It Rate It Bookmark It

Lenox Instrument Company, Inc.

Manufacturer of the FireSight high-temperature camera system for furnace, boiler or hot area applications. These portable or fixed installation camera systems can be air or water cooled and allows direct viewing of flame characteristics, process flow, product orientation, refractory conditions, and other problems before damage occurs.

Review It Rate It Bookmark It

Lismar Engineering B.V. / Lismar, Inc.

Roll inspection systems Eddy current for surface inspection and Ultrasonic for subsurafce inspection.

Review It Rate It Bookmark It

R.K.B. Opto-Electronics, Inc.

R.K.B. Opto-Electronics, Inc. RKB) was founded in 1980 to meet the needs of multinational paper, film, foil, steel, non-wovens and other allied manufacturers for web inspection related equipment. Over the years, our tradition of excellence in web inspection related design, manufacturing, service, and support has been experienced by hundreds of customers in a wide variety of industries throughout the United States and around the world. Discover how our tradition of excellence can benefit your company by choosing RKB for your next web inspection project. RKB provides high performance, reliable, and field proven equipment capable of detecting and analyzing many different types of defects commonly found in web based processes used for manufacturing papers, boards, films, foils, steel, aluminum, fabrics, and related allied products. Our equipment is compatible with a wide variety of web manufactured materials.

Review It Rate It Bookmark It

TSI Inc.


Serves the steel, aluminum and nonferrous industries by offering highly accurate, noncontact speed, length, elongation, diameter and thickness gages to rolling mills, tube mills and service centers throughout the world.

Review It Rate It Bookmark It


UniWest (United Western Technologies Corp.) manufactures ultrasonic (UT) and eddy current sensors, instruments and systems used for the inspection of bar, tube, wire and flat plate products of the steel industry. Our expertise includes the development of specialty-designed transducers and eddy current probes for tough applications in which standard products cannot be utilized. Contact our applications experts to discuss your requirements.

Review It Rate It Bookmark It


Software and systems for machine vision, visual inspection, image analysis, automated defect detection, automated optical inspection (AOI), microscopy, and metrology. High-accuracy measurements and customized solutions. Our products are very powerful and easy to use. They are being applied to successfully solve applications in numerous industries, including: electronics, semiconductors, MicroElectroMechanical Systems (MEMS) manufacturing, printed circuit boards, aeronautics, aerospace & automotive, medical device manufacturing, precision mechanical components & assemblies, packaging, pharmaceutical, and more.

Review It Rate It Bookmark It

Watteredge, Inc.


Designers, manufacturers and rebuilders of custom designed electric arc furnace and ladle metallurgy components including water cooled or air cooled cables, water or air cooled deltas, bus tubes, laminated shunts, electrode clamps, electrode holder repair and other secondary component repair. Systems for all types of high amperage applications. Full service welding shop and on-site copper welding available.

Review It Rate It Bookmark It

Xi’an Abundance Electric Technology Co.,Ltd

China Xi’an Abundance Electric Technology Co.,Ltd is a professional manufacturer of kinds of metallurgy equipments: Electric Arc Furnace( EAF) , Scrap Continuous Preheating Equipment, Submerged Arc Furnace ( SAF), Ladle Refining Furnace (LF, LRF), Basic Oxygen Furnace (BOF), AOD, VOD /VD furnace and etc for steel industry and Ferro alloy Industry. There are hundreds of our equipments installed and running in more than 30 countries all over the world, such as South Africa, Zambia, Egypt, Kazakhstan, Indonesia, Mexico and etc…. We have 16 years rich manufacture experiences and own various technique advantages in metallurgy industry. Based on Chinese low cost of raw materials and cheap labor, we are providing equipments in high quality and with competitive prices.

Review It Rate It Bookmark It