Skip to Content

Home > Steelmaking > Electric arc furnace - control

Electric arc furnace - control (Subscribe)


AMI Meltshops, SA de CV

10 out of 10 stars (1 vote)

Automation solutions for the steel industry, focused on the meltshop area. DigitARC PLC based-electrode regulator; SmartARC furnace power optimization system; EAF, LMF and CC level 1 and 2 automation; power demand control systems; power studies related with EAF operation: power increase, high impedance EAF, harmonics, power demand, power factor, flicker.

Review It Rate It Bookmark It

Badische Stahl-Engineering GmbH

BSE is the consultant No. 1 worldwide, for high productivity and low cost steel mills. We help you to reduce your costs, while you are able to increase your productivity. The technology of our products has been proven in many EAF steelmills around the world. We offer the following services and products: Consulting (human and technical approach), oxygen technology, eaf modernization, environmental technology, engineering services, measurement and control solutions, multi slit rolling technology. We would be pleased, if you visit our webside or contact us for further information.

Review It Rate It Bookmark It

Brock Solutions

Premier North American Drives and Automation Engineering company (formerly known as SAF Drive Systems and S-S Technologies) delivering: - AC / DC Drive Systems Engineering - Industrial Control System (PLC, DCS, PC) Solutions - MES, Manufacturing Execution System Solutions - Project Management - Panel and Control Room Manufacturing.

Review It Rate It Bookmark It

Compas Controls, Inc.


Design, development and market new generation of supervisory control software systems for on-line/off-line supervisory control systems software for industrial furnaces.

Review It Rate It Bookmark It

CVS Makina

From Water Cooled Panels to complete Electric Arc Furnaces, from Ladles to complete Ladle Furnaces, from Tundishes to complete Continuous Casting Machines, from Ducts to complete Fume Treatment Systems and from Engineering Services to Turn-Key Plants, CVS offers economically viable solutions at European standards.

Review It Rate It Bookmark It

Danieli Automation, USA


Supplier of automation and process control systems for metals industry HW integrator, SW development, installation/start-up service.

Review It Rate It Bookmark It



X-ray fluorescence analysis instrument for monitoring critical metals in dusts and fumes emitted during steelmaking on a real-time basis. Data is presented in control room and helps operators monitor iron losses, slag formation, lance height and dust loading.

Review It Rate It Bookmark It

EMPCO (Canada) Ltd.

Complete custom Engineering Design (FEM) and in-house Manufacturing of Electric Arc Furnaces / Ladle Furnaces including Transfer cars, Proprietary weighing systems for ladle turrets, Ladles, Tundishes, Duct systems and Patented water-cooled panels. Please visit our Website!

Review It Rate It Bookmark It

Lenox Instrument Company, Inc.

Manufacturer of the FireSight high-temperature camera system for furnace, boiler or hot area applications. These portable or fixed installation camera systems can be air or water cooled and allows direct viewing of flame characteristics, process flow, product orientation, refractory conditions, and other problems before damage occurs.

Review It Rate It Bookmark It

Primetals Technologies

Drives and automation systems for steelmaking, furnaces, casters, hot and cold rolling mills, profile rolling mills, process lines, as well as complete mini mill electrical systems including turnkey supply of electrical powerdistribution systems. Switches, breakers, relays, switchgear, power distribution substations, static VAR and STATCOM systems. Motors, motor control centers, motor starters and contactors, AC/DC digital drives, distributed control systems, level 1 PLCs, level 2 automation, level 3 plantwide automation, computer modeling, monitoring and data logging, AGCs, flatness measuring

Review It Rate It Bookmark It

Pyrometer Instrument Co. Inc.


Contact/noncontact pyrometers, surface/immersion, optical laser-based infrared (portable, on-line), controllers, indicators.

Review It Rate It Bookmark It

Quad Engineering Inc.

Quad is a full service engineering firm specializing in minimizing downtime for retrofit projects on brownfield sites. Expertise in electrode position regulation offering assessment of existing system performance and melting energy optimization strategies via recipe based tap position and arc length set points, optimizing furnace movements via automated control systems to reduce tap times, alloy and additive control and automation system design, supply and commissioning and custom user friendly operator interface.

Review It Rate It Bookmark It

SMS Siemag

SMS Siemag is a leading supplier in the international business of metallurgical plant and rolling mill technology for the steel and nonferrous metals industries. Our market range comprises the complete process chain from iron- and steelmaking including downstream steel treatment facilities, continuous casting technology as well as hot, section and cold rolling mills right up to strip processing and coating lines. Our program covers all fields of engineering and manufacturing up to erection and commissioning.

Review It Rate It Bookmark It

Stelter & Brinck, Ltd

Direct-fired paste heaters! Our paste heaters replace electric place heaters and reduce furnace shutdowns, improve heat transfer, and eliminate voids in electrodes, unmelted paste, and stubs.

Review It Rate It Bookmark It

Tenova Goodfellow Inc.

Tenova Goodfellow’s innovative “intelligent Electric Arc Furnace”, (i EAF®) is a progressive, modular technology package designed to provide EAF steelmakers with sustainable long-term savings from dynamic control and holistic optimization of the EAF process. The i EAF® enabling technology can be applied to all variations of the EAF process including: top charge melting furnaces (bucket and/or shaft) using scrap, DRI and/or pig iron; the Consteel® process with or without hot metal; continuous DRI fed furnaces. The i EAF® uses well-defined modules that allow EAF melt shops to improve process control, reduce energy consumption & operating costs, increase productivity and lower emissions in a progressive stepwise fashion. Each sequential step in the i EAF® program utilizes a combination of real-time measurements, dynamic process inputs and on-line process models. While the basic structure remains constant, the automation hardware, software and communication modules can be customized according to the individual customer’s existing automation system and network.

Review It Rate It Bookmark It

Tenova Inc.

Design and supply of melt shop equipment including: vacuum degassers, ladle furnaces, melt shop material handling systems, electric arc furnaces, submerged arc furnaces, current conducting arms, electrode regulators and auxiliary melt shop equipment as well as the Consteel® and KT Injection System® technologies. Tenova Inc. also offers a complete range of technical services and spare parts.

Review It Rate It Bookmark It

Wurth Inc., Paul


Modernization of existing blast furnaces and surrounding areas. Cast house floor design including water cooled and air cooled troughs, tilting runners, and fume collection system. Bell-less top and CRM rotary distributor. Lowprofile hydraulic mud guns and tap hole drills (including soaking bar technique). Pulverized coal injection. Ferrous and nonferrous slag granulation and dewatering (INBA). Flexible tuyere stocks. Bleeder valves, equalizing and relief valves. Above burden and below burden probes. Profilometer. Billet/bloom casters. Steel ladle treatment. Automated BOF lance manipulator. BOF

Review It Rate It Bookmark It

Xi’an Abundance Electric Technology Co.,Ltd

China Xi’an Abundance Electric Technology Co.,Ltd is a professional manufacturer of kinds of metallurgy equipments: Electric Arc Furnace( EAF) , Scrap Continuous Preheating Equipment, Submerged Arc Furnace ( SAF), Ladle Refining Furnace (LF, LRF), Basic Oxygen Furnace (BOF), AOD, VOD /VD furnace and etc for steel industry and Ferro alloy Industry. There are hundreds of our equipments installed and running in more than 30 countries all over the world, such as South Africa, Zambia, Egypt, Kazakhstan, Indonesia, Mexico and etc…. We have 16 years rich manufacture experiences and own various technique advantages in metallurgy industry. Based on Chinese low cost of raw materials and cheap labor, we are providing equipments in high quality and with competitive prices.

Review It Rate It Bookmark It