Skip to Content



Home > Inspection and Testing > Automated surface inspection

Automated surface inspection (Subscribe)

Links

> >|

AMEPA GmbH

http://www.amepa.de

Surface roughness becomes more and more important and its on-line supervision comes into the focus. AMEPA offers the new generation of systems to allow the on-line and contact less measurement of the surface roughness values Ra, Rz and Rpc. It is the first system providing a measurement under 45┬░ or 90┬░ to the rolling direction - as requested by the norms as SEP 1940. Key features are independence of sheet surfaces, automatic calibration, very high measurement frequency of up to 20 hertz, provision of microscopic images of the sheet surface,

Review It Rate It Bookmark It

Andec Manufacturing Ltd.

http://WWW.ANDEC.ON.CA

Manufacturer of NDT equipment, primarily ultrasonic and eddy current systems, to detect defects in strip, plate, rod, bar, wire, tube and billet to 2250░F at high speeds. Ultrasonic equipment to detect foreign particles in molten metal and measure the thickness and quality of refractory brick in the operating furnace from the outside. Ultrasonic immersion tanks for defect detection and metal cleanliness.

Review It Rate It Bookmark It

Cognex Surface Inspection Systems popular

http://WWW.COGNEX.COM

Automated on-line surface inspection equipment.

Review It Rate It Bookmark It

Control Vision Inc.

http://WWW.CONTROLVISIONINC.COM

Specializes in providing real-time video of high temperature industrial processes such as welding or steelmaking. Proprietary electro-optic techniques provide video which is virtually free of any brightness or incandescence coming from the scene. When viewing hot steel, the glow is eliminated and surface defects on continuous cast or rolled products are revealed. When viewing arc welding, evidence of the welding arc is removed and details of molten pool and weld joint are easily seen. Small demonstration video clips are available for viewing on the above website.

Review It Rate It Bookmark It

Danieli Corus

http://www.danieli-corus.com

Engineering, equipment, automation and control, and consulting services within the following areas: ironmaking, cokemaking, steelmaking, continuous casting, rolling mill and processing line, environmental.

Review It Rate It Bookmark It

Dr. Schenk GmbH

http://www.drschenk.com

Schenk technology measures sheet and coatings, including multi-layer stacks, with a high degree of accuracy at a wide range of thicknesses.

Review It Rate It Bookmark It

EMG-USA Inc.

http://www.emg-automation.com

EMG's SORM 3plus system is being utilized world wide to provide "on-line" roughness measurements of the complete coil. The system uses a laser optical scanning method to measure the microprofile of a surface. The system can be configured to do a single side or both sides of the strip.

Review It Rate It Bookmark It

Hyundai Heavy Industries Co., Ltd.

http://WWW.HHI.CO.KR

MAN B&W diesel, Sulzer diesel, Ulstein, Artsila engine, engine components, industrial robot, logistic steel pipe manufacturing.

Review It Rate It Bookmark It

Illumination Technologies, Inc.

http://www.illuminationtech.com

Provide standard and custom turn-key lighting systems for automated surface inspection of web materials

Review It Rate It Bookmark It

IMS Systems

http://www.ims-gmbh.de

IMS Systems, Inc. is a leading manufacturer of isotope, X-ray and optical measuring systems which gauge the length, width, thickness, flatness, coating weight, cross-profile and speed of hot and cold ferrous and non-ferrous strip and plate. The company is headquartered in Heiligenhaus, Germany, near Dusseldorf. Its North American operations are based in Mars, PA, near Pittsburgh.

Review It Rate It Bookmark It

Innerspec Technologies, Inc.

http://www.innerspec.com

Innerspec« Technologies, Inc. is dedicated to the design and implementation of EMAT (Electro Magnetic Acoustic Transducer) technology. With over ten years of experience in fielding state-of-the-art EMAT production weld inspection equipment, Innerspec« Technologies remains the world's most proven supplier of EMAT products. Using our patented EMAT technology, our temate« products boast several million hours of "couplant-free" ultrasonic inspection in automated, continuous lines, in some of the harshest industrial environments. Our temate« users enjoy the benefits of automated, volumetric ultrasonic inspection, without the hassles of couplant errors and operator dependencies. When inspection requirements call for fast, repeatable, robust, and sensitive, full-body capability, a temate« EMAT based system is a strong solution candidate. Innerspec« Technologies modular temate« systems are now easily tailored to meet new demands and applications. We welcome your inquiry for our standard temate« products or for your custom inspection requirements.

Review It Rate It Bookmark It

ISRA VISION PARSYTEC

http://www.isravision.com

ISRA VISION PARSYTEC manufactures automated inspection systems that "see" discrete defects in metal. ISRA offers one-sided and two-sided inspection for a complete process management solution. ISRA VISION PARSYTEC is a subsidiary of ISRA VISION SYSTEMS AG. ISRA offers worldwide sales, service, and support. ISRA has offices in Europe, North America and Asia.

Review It Rate It Bookmark It

LASOR/Systronics

http://www.lasorsystronics.com

LASOR/Systronics has answered the surface inspection neeeds of the metal industry. The EAGLE Vision System finds defects suchas: pinholes, scabes,laminations and other surface anomalies. The Advanced Defect Classification Software allows the operator to find similar defects. The system classifies them into categories based on characteristics. The system performs both one sided and two sided inspections for cold or holt rolled mills. Various sensors, laser or camber, or a combination can be used with the system to take advantage of optimum sensor technology.

Review It Rate It Bookmark It

Lismar Engineering B.V. / Lismar, Inc.

http://www.lismar.com

Roll inspection systems Eddy current for surface inspection and Ultrasonic for subsurafce inspection.

Review It Rate It Bookmark It

MARKTEC Corporation

http://www.marktec.co.jp

MARKTEC is a leading manufacturer of NDT equipment and systems using Magnetic Particle Testing (MPT), Penetrant Testing (PT) and Eddy Current Testing (ECT) method. We recently developed fully automatic, in-line magnetic particle inspection system for steel billet surface utilizing CCD cameras and Image processing.

Review It Rate It Bookmark It

Micron Automation, Inc.

http://www.alumivision.com/

On-line inspection for pinholes, cracks, pores and fractures in metal foil materials.

Review It Rate It Bookmark It

Novacam Technologies Inc.

http://www.novacam.com

Novacam Technologies is manufacturer of microcam-3D fiber-based profilometers used for NDT non-destructive testing, metrology, process control, roughness measurements, surface mapping and inspection. It is well suited for fast real-time continuous profilometry measurements. Due to large standoff distance and small probes it is build to work in inhospitable environments and restricted spaces. Profilometer is based on low coherence interferometry and provides micrometer precision. Measurements are not affected by the ambient lighting. With the same probe IR radiation from the hot steel can be captured and analyzed separately. Novacam also provides system integration, consulting and contract R&D for industrial applications.

Review It Rate It Bookmark It

Parsytec AG

http://www.parsytec.de

Parsytec is the world's largest developer, manufacturer, and marketer of quality control software for surface inspection in strip materials production.With more than 400 installations worldwide, 'espresso' by Parsytec is the most advanced surface inspection system providing Parsytec customers with reliable and comprehensive information about the relevant surface defects at all production steps. Its innovative software platform 'parsytec 5i' enables customers to easily create individual surface quality yield management applications and integrates surface quality data with process data Parsytec is headquartered in Aachen, Germany and has subsidiaries throughout the world, including one in Chicago IL serving the American market.

Review It Rate It Bookmark It

R.K.B. Opto-Electronics, Inc.

http://www.rkbopto.com

Manufacturer of machine vision imaging, coating streak and scratch inspection, web inspection, hole detection, splice detection and various quality assurance and control technologies.

Review It Rate It Bookmark It

Sarclad North America, L.P.

http://www.sarclad.com

Roll inspection systems, using eddy current for surface inspection and ultrasonic for subsurafce inspection. Grinder-mounted systems for roll shops.

Review It Rate It Bookmark It

SIS Struck Innovative System GmbH

http://WWW.STRUCK.DE

Inline rollmark detection system; inline hole detector system; inline can seam control.

Review It Rate It Bookmark It

Unilux, Inc.

http://WWW.UNILUX.COM

Surface inspection lighting and video equipment for hot and cold continuous processed materials.

Review It Rate It Bookmark It

UNIVIB Ltd

http://www.univib.com

Prevent chattered rolls getting to the mill! UNIVIB offers Chatter_Detect, an easy-to-use post-process surface inspection system for the detection of difficult-to-see chatter marks in the surface of ground mill rolls. The system can automatically detect marks with a depth as small as 2 microinches - this type of chatter being extremely difficult to detect by most conventional methods.

Review It Rate It Bookmark It

UniWest

http://www.uniwest.com

UniWest (United Western Technologies Corp.) manufactures ultrasonic (UT) and eddy current sensors, instruments and systems used for the inspection of bar, tube, wire and flat plate products of the steel industry. Our expertise includes the development of specialty-designed transducers and eddy current probes for tough applications in which standard products cannot be utilized. Contact our applications experts to discuss your requirements.

Review It Rate It Bookmark It

Winstar Technology Co., Ltd.

http://www.winstartek.com.tw

Winstar Technology, a Automatic Optical Inspection system innovator since 1985 in Taiwan, has been dedicated to Surface Inspection System for industrial application. We have more than 500 units' installation for customer's in-line production quality control. We have rich experience for metal, plastic film & membrane, non-woven, paper... inspection. Hope we can work with you for your QC & business upgrading.

Review It Rate It Bookmark It

> >|